| Micro
Clear I – Neutralizer |
Rental Special:
50% OFF - Rent for the first 12 months on Water Conditioning units
- PLUS -
Receive a one year supply of Liquid soaps. $2,052 Value!!!
*Offer valid until June 1, 2010. Not valid with other offers. New Customers only. Normal installation not included.
|
|
|
 |
FILTER
FOR NEUTRALIZATION OF CORROSIVE, ACIDIC WATER.
BY NEUTRALIZING CARBON DIOXIDE IT CORRECTS
BITTER TASTE AND BLUE-GREEN STAINS.
Reduction in the potential leaching of copper,
lead, and other metals from plumbing systems
can also be achieved in the raising of the pH.
|
The pH Range
Filters work best on water having a pH of 6.1-7.
When pH is below 6.1, a chemical feed pump using
sodium carbonate, sodium hydroxide, or potassium
carbonate is recommended. |
Unique
Media
WaterCare’s uniquely blended neutralizing
minerals are self-regulating so that the closer
the pH gets to neutral the more slowly they dissolve.
Maintenance
Filter must be backwashed periodically to keep
media loose to prevent pressure drop and channeling.
Less frequently (see specifications), it is necessary
to replace the dissolved media.
Post Treatment
There may be a slight increase in water hardness.
In special cases, it may be necessary to follow
the acid neutralizer with a water softener. |
|
| MicroClear
I - CareAg Iron Removal |
 |
FILTER
FOR REDUCTION OF COMMON SUSPENDED MATTER ABOVE
40 MICRONS IN SIZE INCLUDING RUST AND PREOXIDIZED
IRON.
The lower flow rates required for backwashing
allow these filters to be used on water supplies
having limited flow rates. This also results
in the conservation of water.
The CareAg medium is non-hydrous silicon dioxide.
It has an advantage over filter sand in that
it has an irregular surface which is excellent
for filtration and yet it is light weight, which
makes it easy to backwash and clean.
For filtration of particles smaller than 40 micron
a StrataCare filter or cartridge filtration should
be considered. |
|
| MicroClear
II - Greensand Iron Removal |
 |
WATERCARE
IRON, MANGANESE & SULFIDE FILTRATION SYSTEM
WITH TIME-CLOCK SELF CLEANING CYCLE
Prevents rust and gray staining and reduces unpleasant
odors.
Prevents iron build up in pipes and hot water
heaters, and eliminates staining of clothes and
fixtures.
Economical
Easy on your septic system, longer periods between
self cleaning cycles than other types of filters. |
Hi Performance
Reduces Iron & Hydrogen Sulfide in concentrations
up to 10ppm.
Manganese up to 2ppm.
Features WaterCare’s proven brass control. |
|
| Promate
5.0-IC-2.0 |
 |
The
reason your water can taste, look and smell
bad is the incredibly high concentrations of
dissolved minerals. You can't see or feel them,
but they're there! The ProMate 5.0-IC-2.0 removes
these minerals leaving clean, good smelling,
good tasting water. |
- Fully assembled, ready for installation.
- Demand initiated regeneration with variable
reserve capacity automatically adjusts to
your family’s changing water use and
regenerates only as needed.
- Requires no chemicals or salt for operation
or regeneration.
- Removes dissolved and precipitated iron.
- Powerful, reliable and user-friendly electronics
automatically monitor water-treatment functions
including:
- Days since last regeneration
- Gallons since last regeneration
- Gallons reserve capacity
- Maximum flow rate for the last seven
days
- Current flow rate
- Total number of regenerations
- Digital display for time of day and gallons
remaining.
- Permanent memory backup of all programmed
settings during power outages with no need
for battery backup.
|
| top
of page |
